Conference Program

Celle Drilling 2019, 10-11 September at Congress Union Celle

  • 11:30 - 13:00
  • 13:00 - 13:10
    Thor Noevig, Chairman GeoEnergy Celle e. V.
  • 13:10 - 13:30
    Conference Overview
    Dr. Anne Bartetzko
  • 13:30 - 14:00
    Keynote Talk
    The Rig as a Platform for Digital and Automated Drilling.
    Siggi Meissner, President, Global Drilling & Engineering, NABORS
  • 14:00 - 14:30
    Keynote Talk
    Digital or Not, the Most Important Task for Geoenergy is Climate Protection.
    Dr. Erwin Knapek, President BVG - Bundesverband Geothermie (German Geothermal Association)
  • 14:30 - 15:00
    Keynote Talk
    Horizontal Drilling Technology Provides the Key to a Scalable Geothermal Energy Solution.
    Robert Winsloe, Vice President Sales & Marketing, Eavor Technologies Inc.
  • 15:00 - 15:30
    Coffee Break & Networking
  • 15:30 - 17:30
    • Session 1: Digitalisation and Data Acquisition

      Session Chairs: Jan Einar Gravdal, Becky Lepp
    • Power Supply from Surface and High-Bandwidth Communication for Novel Integrated Downhole Drilling System
      Abdelrhani Lamik, TDE Equipment and Manufacturing GmbH
    • Wintershall Goes Digital - Initial Results of Drilling Digitalization Pilot Projects
      Andreas Rosener, Wintershall Holding GmbH
    • Results of a Prototype Drilling Data Aggregation System Called DDHub
      Nejm Saadallah, NORCE Norwegian Research Centre AS
    • Digitally Improving Operational Performance
      Sarah McElroy, KCA Deutag
    • (ePoster) Innovative Digital Well Construction Planning Solution Enhances Coherency and Efficiency of the Drilling Design Process
      Waldemar Szemat, Schlumberger
    • Session 2: Drilling Dynamics and Measurements

      Session Chairs: Michael Neubert, Bernd Schmalhorst
    • Measurement and Simulation of High-Frequency Torsional Oscillation Phenomena: A Case Study in Norway
      Sui-Long Lam, Baker Hughes, a GE Company
    • Motor-Assist Push-the-Bit Rotary-Steerable Systems with Multiple High-Frequency (800Hz) Drilling Dynamics Recorders
      Junichi Sugiura, Sanvean Technologies
    • Laboratory Analysis of Local and Extended Friction Joints for Mitigation of High-Frequency Torsional Oscillations in Bottom-Hole Assemblies
      Vincent Kulke, TU Braunschweig
    • A Best Practice for Slide-Rotate Drilling Transitions Reduces BHA Damages and Non-Productive Time
      Kevin Morgan, Fracture ID
    • (ePoster) HIL-Simulations of Drill String Dynamics – Investigations on a scaled Drilling Simulator
      Christoph Hanne, TU Braunschweig
  • 17:30 - 18:30
    Coffee Break & Networking
  • 18:30
    Conference Evening
  • 07:30 - 08:30
    Registration, Coffee & Networking
  • 08:30 - 10:30
    • Session 3: Case studies

      Session Chairs: Matthias Reich, Wolfgang Schoebel
    • Innovative Milling Technology Enhances P&A Performance to Save 11 Rig Days
      Tomasz Stanko, Schlumberger
    • The Deep Well GEN-1ST-A1 (Geretsried, Bavaria) as Case Study to Explore a Geothermal Reservoir in the Southernmost German Molasse Basin
      Inga S. Moeck, Leibniz Institute for Applied Geophysics
    • Cementing Across Salt Zones – How Do the Cement Slurry Properties Respond to Salt Formations?
      Oliver Czuprat, Wintershall DEA Deutschland AG
    • Continuous Circulation Drilling, MPD: Adding Value Through Safety Enhancements and Cost Control
      Diego Ferrandes, Drillmec SpA
    • (ePoster) Innovative Drilling Plan Leads to Breakthrough Performance in Production Enhancement and AFE Reduction in West Kuwait Field
      Marwa Omar, Baker Hughes, a GE Company
    • Session 4: Geothermal Wells

      Session Chairs: Joachim Oppelt, Andreas Ruch
    • Prediction of PDC Drill Bit Performance for Hard Rock Geothermal Drilling Using Bit-Rock Interaction Models
      Adrian Ambrus, NORCE Norwegian Research Centre AS
    • Bio Enhanced Energy Recovery - Innovative Carrier Fluid for Reservoir Optimization in Geothermal Wells
      Kerstin Kogler, Mining University Leoben
    • Premium Treatment System for Granite and Sandstone Formations - Fluid Development and Field Trial in a Geothermal Well
      Nils Recalde Lummer, Fangmann Energy Services
    • A Wellbore Cement Sheath Damage Prediction Model with the Integration of Acoustic Wellbore Measurements
      Michal Kruszewski, International Geothermal Centre
    • (ePoster) Low-Enthalpy Geothermal Heating Systems Modeling: Reducing Risks for Decision Makers and Consumers
      Gallan Oliveira, Ross DK
  • 10:30 - 11:00
    Coffee Break, Networking & e-Posters
  • 11:00 - 12:30
    • Session 5: Drilling Simulation

      Session Chairs: Junichi Sugiura, G.-P. Ostermeyer
    • HIL Simulation of Drilling Control Systems and Downhole Effects in the OpenLab Drilling infrastructure
      Robert Ewald, NORCE Norwegian Research Centre AS
    • A Stochastic Framework for Quantification of Uncertainties and Pressure Margins in the Planning of Drilling Operations
      Eric Ford, NORCE Norwegian Research Centre AS
    • Automated Dynamic Kick Detection and Management during Drilling Operation: A Case Study and Simulation Analysis
      Patrick Höhn, Clausthal University of Technology
    • (ePoster) Simulating Steering Dynamics to Reduce Wellbore Tortuosity and Friction
      Mark Hutchinson, Leader Drilling International
    • Session 6: Alternative Drilling Technology

      Session Chairs: Michael Röhrlich, Jürgen Schamp
    • Low Wear Drilling with Electric Impulses
      Matthias Voigt, Technische Universität Dresden
    • What’s Knocking There? Development of Mud-Driven Down-Hole Hammers for Deep Drilling (DGMK 733-2)
      Leon Grottendieck, TU Bergakademie Freiberg
    • Radial Jet Drilling a Cost Effective Frackless Solution for Production Enhancement in Marginal Fields
      Ronald den Boogert, Radial Drilling Europe b.v.
    • (ePoster) Radial Jet Drilling, Geothermal Energy, EGS, Stimulation
      Simon Hahn, International Geothermal Centre Bochum
  • 12:30 - 13:30
    Lunch Break, Networking & ePosters
  • 13:30 - 15:00
    • Session 7: Equipment

      Session Chairs: Udo Großmann, Carsten Freyer
    • Pre-Placed, Full Strength, Hydraulic Cutting Tool Represents a Step Change in Technology for Quickly Saving Hole and Recovering from Stuck Pipe Situations
      Mark Gazey, Churchill Drilling Tools
    • Measuring the Fatigue Life of Casing Connection Threads under Diverse Scenarios of Complex Loads Utilizing New Concept of Multiaxial Fatigue Testing Setup Margins in the Planning of Drilling Operations
      Arash Asgharzadeh, Clausthal University of Technology
    • Expert System for Drill Bit Selection Optimizes Drilling
      Waleed Agawani, Baker Hughes, a GE Company
    • Session 8: Cementing, Drilling Fluids, Mud Logging

      Session Chairs: Gerald Heisig, Nils Recalde Lummer
    • A Novel Approach for Better Cementing in Horizontal Wells
      Anatoly Medvedev, Schlumberger
    • Leakage Measurements of a Casing-Cement Sheath-Tubing System Reproducing Sustained Pressure Conditions
      Katherine Beltrán Jiménez, Federal University of Rio de Janeiro / NORCE Norwegian Research Centre AS
    • The Advantages of Measuring and Analyzing the Methane Absorbed in OBM In-Line During Drilling Operations
      Johnny Petersen, NORCE Norwegian Research Centre AS
  • 15:00 - 15:30
    Networking Break and Exhibition & ePoster
  • 15:30 - 17:00
    Visit of Drilling Simulator Celle Research Institute
    (optional for interested participants)
  • 17:00
    End of Conference